First take the thread of Pedal L to direct vertically to crank L, then firmly fix the Pedal marked L (7L) to the crank arm marked L in a anti-clockwise direction until tight.Fix the Saddle (9) to the Seat Supporter Tube Set (8) with 13-15 Wrench (21) until tight.Fix the Seat Supporter Tube Set (8) to Main Frame (1) with M16 Lock Knob (10) until tight.to install the Rear Stabilizer (6) to Main Frame (1). Fix the Front Stabilizer (5) to Main Frame (1) using 2 x Carriage Bolts (4), 2 x Flat Washers (3) and.EXPLODED VIEWĥ easy steps to assemble then you’re ready to workout – it takes approx 30 mins to assemble. The Spin bike is designed for the use of indoor only, please do not use it in the environment where it is wet and it’s in the sun.The maximum user weight for the belt bike is 330lbs.The Spin bike is not suitable for children under 14 years of age or for people with physical conditions unless supervised by an adult.Never leave the bike unattended especially if there are young children around.Always use proper lifting techniques and / or assistance when lifting or moving the bike to avoid injury.Regular maintenance will prolong the life of your bike and prevent injury – refer to the Maintenance section below.Spinning pedals can cause injury and damage the bike – to reduce pedal speed, add resistance by turning the TENSION control.Never exceed the MAX or STOP mark when adjusting the handlebars and saddle, to ensure the adjustment locks are tight and secure.

In the event the bike malfunctions, PUSH down on the red EMMERGENCY STOP – the bike will stop immediately – contact the distributor for further instructions.Adjust the front and back stabilizers each time you use the bike to ensure it’s stable and level with the floor.

For safety, the equipment should have at least 0.5 meter of free space all around it.

Always place the bike flat on the ground in a dry clean area, to avoid placing the bike on thick carpet.

Delta meteor exercise bike manual